Adjusting The Pressure Of The Front Brake Action; Adjusting The Clutch Tension - SHERCO X-RIDE 125 Manual Del Propietário

X-RIDE125/290 X-RIDE125/290
MAINTENANCE PROCESSES

Adjusting the pressure of the front brake action

The tension of the front brake lever is adjusted using the threaded shaft (2).
- Loosen the locking nut (1).
- Screw the shaft in or out (2).
- Lock the position with the nut (1).
Note: Leave some free play in order to prevent the lever from getting
stuck and not returning properly.
Adjust the tension of the clutch
The clutch lever tension adjustment is regulated by the threaded shaft.
- Loosen the locking nut (1).
- Screw the shaft in or out (2).
- Lock the position with the nut (1).
Check and replace the clutch fluid (see steps for the front brake).
Type of brake fl uid: DOT4.
Note: Leave some free play in order to prevent the lever from getting
stuck and not returning properly.
1
2
1
Adjusting screw
2
Adjusting screw
owner's manual 46
X-RIDE 125/290