Installation; Preliminary Operations - Gaggia SUP 020 Instrucciones De Uso

INSTALLATION

4 INSTALLATION
For your own safety and the safety of
others, you must strictly comply with the
"Safety Rules" described in chap.3
4.1 Package
The original packaging was designed and
made to protect the machine during
shipping.
We recommend keeping it for future
transport purposes.

4.2 Preliminary operations

• Remove the water tray (12) with grating
from the packaging materials.
• Take the coffee machine out of its
packing and position it in a suitable
place that meets the requirements
described in the safety rules (chap.3.)
• Insert the water tray (12) into the slot
provided on the machine; make sure that
the tray, the dregs box (10) and the coffee
dispensing unit (18) are correctly fitted
and that the front door (16) is closed.
• Fit the coffee bean container lid (2) onto
the coffee bean container (1).
Store the cleaning brush (20), the coffee
dispensing unit wrench (19) and ground
coffee measuring spoon (21) in a safe
and convenient place.
• Before plugging in the machine, make
sure the power switch (7) is set to -0-.
If the red light (30) flashes when you turn
on the machine, it means that one of the
above-described parts has not been
correctly fitted in place.
Important note: It is important to
read the contents of Chapter 14,
which explains in detail the meaning of
all machine signals provided to the user
by the lights on the control panel.
4.3 Turning on for the first time
• Lift out the water container (9) and
remove the lid (8). Rinse it out and fill it
with fresh drinking water, making sure
you do overfill it. Lower the container
back into place inside the machine and
replace the lid (8).
Fill the container (9) only with
cool, still water. Hot water or other
liquids may damage the container and/
or the machine.
Always make sure there is enough water
inside the container before starting the
machine.
• Take off the lid (2) and fill the
container with coffee beans (1).
Fit the lid of the coffee container
(1) back into place. Ground or
freeze-dried coffee or any other objects
will damage the machine.
• Replace the lid (2) on the coffee
container (1).
• Insert the plug (11) into a suitable outlet.
• The power switch (7) is set to -0-. Simply
press the button (7) to turn on the
machine; the green pilot light (29) will
go on.
• To load the circuit, position the
steam tube (15) over the drip tray. Turn
the knob (17) counterclockwise and
wait until water flows out smoothly from
the steam tube; to cut off flow, turn
25