Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY
CANOPY
• To install the canopy, slide the male ends
6)
of the canopy into the female slots on
the stroller frame (Fig. 6a).
• To open the canopy, push forward on the
front edge of the canopy while holding
the rear of canopy in place (Fig. 6b).
• To fold the canopy, pull backwards on
the front edge (Fig. 6b).
BASKET
• Rear basket tube needs to be installed
7)
prior to use. Insert the female end of
the rear basket tube into the male ends
located on the basket frame until it locks
into place (Fig. 7).
7
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 6a
Fig. 6b
Basket frame
Rear basket tube
Fig. 7
BRAKES
WARNING:
Always set
brakes when the stroller is not
being pushed so that the stroller
will not roll away. NEVER leave
stroller unattended on a hill or
incline as the stroller may slide
down the hill.
• To engage brakes, apply light downward
8)
pressure to the brake lever located on
each rear wheel. The stroller may require
slight forward or rearward movement in
order to line up the teeth on the brake with
each wheel brake cluster (Fig. 8). Check
that the stroller will not move and that both
brakes are properly applied. To release,
gently lift up on the brake lever.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

SAFETY

Fig. 8
8

Publicidad

Tabla de contenido
loading

Tabla de contenido