10.4.5 Switching-off SERVO flash mode
SYNC
M-SERVO
• Press the displayed mode of operation on
Z
24 mm
OOM
INFO
1/16
SLAVE
• Press the
SERVO
TTL
• Press the sensor button on the touch
M
The selected mode of operation is adopted.
k
154
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
sensor buttons on the
touch display and select the desired mode
TTL
of operation, e.g
.
display for the mode of operation, e.g
TTL
.
11 OPTION menu
11.1 Modelling light (MOD.LIGHT)
The modelling light is a high-frequency
stroboscopic flash. It creates the impression
of a semi-permanent light for a duration of
about 3 seconds. The modelling light enab-
les the user to assess light distribution and
the formation of shadows before taking
pictures.
The modelling light is triggered with the
manual firing button
Setting procedure
• Press the
for the selection menu to appear.
• Press the
touch display.
• Press the
STANDBY
touch display and select "MOD.LIGHT".
MOD.LIGHT
• Press the
AF BEAM
touch display.
• Press the
the touch display and switch the modelling
MOD.LIGHT
light on or off. The setting is adopted
Off
immediately.
On
After activation of the modelling light,
"MOD.LIGHT" appears in the INFO menu.
.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
MOD. LIGHT
sensor button on the
ON
OFF
or
sensor button on