Operation - Home Decorators Collection GAZELLE 91150 Guía De Uso Y Mantenimiento

Assembly - Attaching the Light Kit
2
Attaching the shades and installing
the bulbs
CAUTION: Make sure the power is off before attaching or
removing the shades.
WARNING: Allow the bulbs to cool completely before
replacing.
□
Twist the plastic shade (G) into light kit fitter (F) clockwise.
□
Install the bulbs (J) into the sockets on the light kit fitter (F).
□
Attach the pull chain extensions (BB).
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage bulbs are installed. Reset
the lights by turning off the power, replacing the bulbs with the
correct wattage bulbs, and turn the power on.

Operation

Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right).
NOTE: Wait for the fan to stop before reversing the direction of
blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
F
G
J
XX
XX
13
Please contact 1-800-986-3460 for further assistance.
E
BB
HOMEDEPOT.COM/HOMEDECORATORS