Home Decorators Collection GAZELLE 91150 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
6
Close-to-Ceiling mounting
WARNING: The locking slots of the ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock the canopy (C) in place. Im-
mediately tighten the two mounting screws (GG) firmly.
□
Install the remaining two mounting screws (GG) and washers
(HH) into the holes in the canopy (C) and tighten firmly.
Assembly - Attaching the Fan Blades
1
Attaching the blade brackets
WARNING: Remove the rubber motor stops on the bottom of the fan
before installing the blades ortesting the motor.
NOTE: The hole for the rubber plug (DD) is the access point to
the blade bracket (I) screws. After tightening all of the blade
bracket screws, insert the rubber plug (DD) to prevent water
from entering the switch housing and to reduce the risk of fire,
electric shock, or other personal injury.
□
Fasten the blade bracket (I) to the motor (E) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (E) and tightening the motor screws that are pre-
assembled to the blade bracket (I).
□
Repeat for the remaining four blade brackets (I).
□
Insert the rubber plug (DD) into the hole in the switch cup
(UU).
HH
GG
UU
DD
11
Please contact 1-800-986-3460 for further assistance.
GG
A
C
E
E
I
HOMEDEPOT.COM/HOMEDECORATORS