Section 2 General Information And Setup; Know Your Power Washer; Emissions Information; Remove Contents From Carton - Generac Small Pro Power Washer El Manual Del Propietario

Section 2 General Information and Setup

Know Your Power Washer

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Read this manual
assembling and operating this unit. Save this
manual for future and immediate reference.
Replacement owner's manuals are available
at www.generac.com.

Emissions Information

The United States Environmental Protection
Agency (US EPA)
Resources Board
equipment certified to California standards)
requires that this engine/equipment complies
with exhaust and evaporative emissions
standards. Locate the emissions compliance
decal on the engine to determine applicable
standards. For
information, please reference the included
emissions warranty. It is important to follow
the maintenance specifications in the manual
to ensure that the engine complies with the
applicable emissions
duration of the product's life.

Remove Contents from Carton

1. Open carton completely by cutting each
corner from top to bottom.
2. Remove and verify carton contents prior to
assembly. Carton contents should contain
one each of the following:
• Main Unit
• Handle Assembly
• High-pressure Hose
• Siphon Tube & Filter
• Spray Gun
• Lance
• Oil
• Parts Bag (includes):
– Gun and Hose Hook Wireforms with
Screws, Nuts, and Allen Wrench
– Owner's Manual
– Owner's Registration Card
– Bag of Colored Nozzles
– Filter Screen* (*Factory installed on
axial cam pumps)
3. Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.
Owner's Manual for Power Washer
(000100a)
thoroughly before
(and California
(CARB), for engines/
emissions warranty
standards for

Assembly

Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Call Generac Customer Service at 1-888-
GENERAC
assembly issues or concerns. Please have
model and serial number available.
1. See Figure
handle supports (B). Push in latch buttons
(C) and allow handle to slide into position.
Button will lock handle into place.
Air
C
the
Figure 2-1. Insert Handle
2. See Figure
with provided fasteners. Tighten securely.
Figure 2-2. Install Gun and Hose Hooks
3. See Figure
into spaces provided in handle.
Figure 2-3. Insert Nozzles
General Information and Setup
WARNING
(1-888-436-3722)
2-1. Place handle (A) onto
A
B
001528
2-2. Install gun and hose hooks
2-3. Insert and snap nozzles
001531
(000100a)
for any
001683
3