Cooktop Use - Sears Kenmore Elite 664.9522 Serie Manual De Uso Y Cuidado

Keypad Feature
WARMING Slow cook drawer 1. Press WARMING DRAWER SLOW COOK to select the Slow Cook function at the
DRAWER SLOW
COOK/OFF
COOKTOP WARM Warming zone
ZONE ON/OFF/
CONFIRM
DELAY START Delayed start
COOK TIME Timed cooking
LO TEMP CLEAN Clean cycle
START Oven control
(hold 3 sec) lockout
WARNING
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set to anywhere between Hi and Lo.
Push in and turn to setting.
REMEMBER: When range is in use, the entire cooktop area
may become hot.
10
Instructions
Low setting.
2. To select a higher temperature setting, press WARMING DRAWER SLOW COOK
a second time for the High setting.
3. Place the food(s) in the warming drawer.
4. Press START to begin heating the warming drawer.
5. Press WARMING DRAWER OFF to turn off the heating element.
Refer to the "Warming Drawer" section for more information.
Press COOKTOP WARM ZONE ON/OFF to select the warming element on the
cooktop, and then press COOKTOP WARM ZONE CONFIRM.
Press COOKTOP WARM ZONE ON/OFF again to turn off the warming element.
The Delay Start keypad is used to enter the starting time for an oven function with
a delayed start. Delay Start should not be used for foods such as breads and cakes
because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the "Cook Time" section.
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see the "Cook Time" section.
See the "Clean Cycle" section.
1. Check that the oven is off.
2. Press and hold START (hold 3 sec) for 3 seconds.
3. A tone will sound and "Control Locked" will scroll, and then "Locked" will be
displayed.
4. Repeat to unlock. No keypads will function with the controls locked. The cooktop
functions are not affected by the oven control lockout.

COOKTOP USE

Fire Hazard
Ceramic Glass
The surface cooking area will glow red when an element is
on. Some parts of the surface cooking area may not glow
red when an element is on. This is normal operation. The
element will also randomly cycle off and back on again, even
while on Hi, to keep the cooktop from extreme temperatures.
It is normal for the surface of light-colored ceramic glass to
appear to change color when surface cooking areas are hot.
As the glass cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches,
pitting, abrasions and to condition the glass surface. Ceramic
glass cooktop cleaner and a cooktop scraper are also
recommended for stubborn soils. Do not use abrasive cleaners,
cleaning pads, or harsh chemicals for cleaning. The Cooktop
Care Kit Part Number 31605 contains all of the items needed
to clean and condition your ceramic glass cooktop. Refer to
the "Range Care" section for additional information.
IMPORTANT: To avoid permanent damage to the cooktop
surface and to make soils easier to remove, clean the cooktop
after each use to remove all soils.