Coolant - Benelli 752S Manual Del Propietário

Coolant

The coolant level should be checked befo-
re each ride. In addition, the coolant must
be changed at the intervals specified in
the periodic maintenance and lubrication
chart.
To check the coolant level
Place the vehicle on a flat surface and
keep it upright.
TIP
• The coolant level must be checked
on a cold engine since the level va-
ries with engine temperature.
• Make sure that the vehicle is positio-
ned straight up when checking the
coolant level. A slight tilt to the side
can result in a false reading.
Check the coolant level in the coolant re-
servoir.
TIP
The coolant should be between the mini-
mum and maximum level marks.
1
2
2. Maximum level mark
3. Minimum level mark
If the coolant is at or below the min. level
reference (2), remove the coolant reservo-
ir cap and restore the liquid level up to the
max. level. (1).
To access the coolant tank, remove the 2
screws and the rubber cover on the igni-
tion lock.
6 - 13
Periodic maintenance and adjustment
3. Screws (tightening 10 Nm)
4. Rubber seal
Unscrew 2 more screws and remove the
tank fixing plate.
5. Screws (tightening 10 Nm)
6. Tank fixing plate
3
EN
6
4
5
6