Non-Contact Ac Voltage Measurements - Sonel CMP-401 Manual De Uso

To avoid electric shock, be sure the thermocouple has been
removed before changing to another measurement function.
In order to realise temperature measurement it is necessary to
realise the following actions:

place the rotational selector in the position °C °F,

press the MODE button to select °C or °F,

insert the temperature probe into the negative COM and the
V/Ω/TEMP terminals, making sure to observe the correct po-
larity,

touch the temperature probe head to the part whose tempera-
ture you wish to measure, keep the probe touching the part
under test until the reading stabilizes (about 30 seconds),

read the temperature in the display, the digital reading will in-
dicate the proper decimal point and value,

having done the measurement disconnect the test leads from
the meter.
5.9

Non-Contact AC Voltage Measurements

Risk of Electrocution. Before use, always test the voltage de-
tector on a known live circuit to verify proper operation.
In order to realise the test it is necessary to realise the following
actions:

touch the current clamp to the live conductor or insert into the
live side of the electrical outlet,

if AC voltage is present, the detector light will illuminate.
46
WARNING:
WARNING:
CMP-401 – USER MANUAL