SATA J Serie Manual Del Uso página 11

Indicator status
Battery pack overheating:
When the red light is flashing, remove the battery pack and let it cool for 15-30 min. After the battery pack temperature drops,
insert the battery pack to continue charging which will proceed normally.
Damage of battery pack or charger:
When the red light is flashing, unplug the battery pack and let it cool for 15-30 min. After the battery pack temperature drops,
insert the battery pack to continue charging. If the red light is still flashing and the charging cannot be conducted properly, the
battery pack or charger may be damaged and shall be repaired by professional technician.
Caution:
When the battery pack is removed from the charger or the battery pack is plugged into a charger that is not
powered, the battery pack will automatically discharge. Therefore, after long-term storage, it shall be recharged first
Caution:
Charging time depend on the ambient temperature and status of battery pack
51503
On/off/flashing
Green light stays on
Red light stays on
Red light flashes
中文
EN DE
Status description
Battery pack is not inserted or the charging is com-
pleted
Charging
Battery pack temperature is too high, or the battery
pack/charger is damaged
RU KO PT JA ES
11