Preparing The Lancing Device - i-SENS KetoSens BT Manual Del Usuario

Note
Repeated puncturing at the same sample site may cause pain or
skin calluses (thick hard skin). Choose a different site each time
you test.

Preparing the Lancing Device

Step 1
Wash hands and sample site with
soap and warm water. Rinse and dry
thoroughly.
Step 2
Unscrew and remove the
adjustable tip.
Step 3
Insert a new disposable lancet firmly into
the lancet holder. Twist off the protective
cover of the lancet and set it aside, then
replace the adjustable tip. Keep the
protective cover to replace on top of the
used lancet after testing.
34 www.i-sens.com