Foreground Suppression Mode - CARLO GAVAZZI PD30ETB BP IO Serie Manual De Instrucciones

2.6.2.4. Foreground suppression mode

1) Single value teach command sequence:
The button is found in menu: "Teach-in SSC1" or "Teach-in SSC2" -> "Teach-in Single value
SSC1" or "Teach-in Single value SSC2" -> "Teach Background"
1. Aim the sensor at the Background
2. QoT is shown in -> "Quality of Teach" e.g. 144 %
2) Dynamic teach command sequence:
The button is found in menu: "Teach-in SSC1" or "Teach-in SSC2" -> "Teach in Dynamic
SSC1" or "Teach in Dynamic SSC2" -> "Teach Background"
1. Aim the sensor at the Background
2. QoT is shown in -> "Quality of Teach" e.g. 100 %
32
Rev.00 - 06.2021 | MAN PD30ETB IO-Link EN | © 2021 | CARLO GAVAZZI Industr6
Hyst
Sensor
SSC
SP2
TP2
OFF
A. Press "Teach Background"
B. Teach-in Result.Teach-in state = e.g. "SUCCESS"
A. Press "Teach Background start"
B. Teach-in Result.Teach-in state = e.g. "WAIT FOR COMMAND"
C. Press "Teach Background stop"
D. Teach-in Result.Teach-in state = e.g. "SUCCESS"
Hyst
Sensor
ON
SP2
Hyst
SP1
TP1
ON
window
Hyst
OFF
FGS
SP1
Background
Sensing distance
OFF
Sensing distance
ON