Wiring Diagrams; Commissioning - CARLO GAVAZZI PD30ETB BP IO Serie Manual De Instrucciones

NOTE!
The temperature measured by the sensor will always be higher than the ambient temperature, due to internal
heating.
The difference between ambient temperature and internal temperature is influenced by how the sensor is
installed in the application. If the sensor is installed in a metal bracket the difference will be lower than if the
sensor is mounted in a plastic one.

3. Wiring diagrams

PIN Color
1 Brown
2
White
3
Blue
4 Black

4. Commissioning

150 ms after the power supply is switched on, the sensor will be operational.
If it is connected to an IO-link master, no additional setting is needed and the IO-Link communication will start
automatically after the IO-Link master sends a wake-up request to the sensor.
34
Rev.00 - 06.2021 | MAN PD30ETB IO-Link EN | © 2021 | CARLO GAVAZZI Industr6
1 BN
V
4 BK
2 WH
3 BU
V
Signal Description
10 ... 30 VDC Sensor Supply
Load Output 2 / SIO mode / External input / External Teach
GND Ground
Load IO-Link /Output 1 /SIO mode
2 4
1 3