Safety Instructions - ESYLUX PD-C360i/24 DIMplus WH Manual De Instrucciones

GB INSTALLATIoN AND oPERATING INSTRUCTIoNS
Congratulations on your purchase of this high-quality ESYLUX product.
To ensure correct device operation, please read these installation/operating
instructions carefully and keep them in a safe place for future reference.
GB
1 • SAFETY INSTRUCTIONS
WARNING! Work on the 230 V power system must be carried out by
authorised personnel only, with due regard to the applicable installation
regulations. Switch off the power supply at the mains before installing
the product.
μ
= Contact gap < 1.2 mm
on the input side, the device is to be protected against short
circuits with a 10 A circuit breaker (fig. 4).
Use this product only as intended (as described in the operating
instructions). Do not alter, modify or paint the device, as this will result
in loss of warranty. Check the device for damage as soon as you
unpack it. If there is any damage, you must not install the device under
any circumstances.
If you suspect that safe operation of the device cannot be guaranteed,
you must decommission the device immediately and make sure that it
cannot be operated unintentionally.
NoTE: Do not dispose of this device with unsorted urban waste.
owners of old devices are required by law to dispose of this device
properly. Contact your town council for further information.
12
2 • DESCRIPTION
ESYLUX PD-C360i/24 DIMplus series presence detector with a
360° field of detection and > 24 m range. ESYLUX presence detectors
are passive infrared detectors, which react to moving heat sources
(e.g. people) (fig. 1 (1) working area (2) head-on to detector (3) diagonally to
detector). If the presence detector senses a change in thermal radiation
inside its field of detection, depending on the preset light value, it will
switch on the light channel for an adjustable period of time. If there
is a change in the natural light value, the artificial light is adjusted
accordingly (constant light control) via the dimming interface.
An additional "HVAC" switch contact can be used to control another
light source or to control the heating, air conditioning and ventilation
systems depending on presence, and regardless of the light value.
The ESYLUX PD-C360i/24 DIMplus series presence detector is designed
exclusively for ceiling mounting. Depending on the model, the device
can either be surface mounted (SM) or recessed mounted (FM).
The ESYLUX presence detector features factory settings and operates
according to preset values. The values can be individually modified
using the ESYLUX Mobil-PDi/plus or the Mobil-PDi/User remote control
(available as optional accessories).