Rohde & Schwarz FPC1000 Manual Del Usario página 23

®
R&S FPC1000
2.2 Placing or Mounting the Instrument
The R&S FPC1000 is designed for use under laboratory conditions, either on a
bench top or in a rack.
Benchtop operation
If the R&S FPC1000 is operated on a bench top, the surface should be flat. The
instrument can be used in horizontal position, standing on its feet, or with the sup-
port feet on the bottom extended.
Mounting the R&S FPC1000 in a rack
The R&S FPC1000 can be installed in the 19" rack mount kit R&S ZZA-FPC1
(order no.1328.7080.02). The installation instructions are part of the adapter kit.
Risk of injury if feet are folded out
The feet may fold in if they are not folded out completely or if the instrument
is shifted. This may cause damage or injury.
● Fold the feet completely in or completely out to ensure stability of the
instrument. Never shift the instrument when the feet are folded out.
● When the feet are folded out, do not work under the instrument or place
anything underneath.
● The feet can break if they are overloaded. The overall load on the fol-
ded-out feet must not exceed 200 N.
Getting Started 1178.4124.02 ─ 03
Preparing for Use
Placing or Mounting the Instrument
8