Britax ADVOCATE Guia Del Usuario página 21

Britax Child Safety, Inc.
d. Pull the end of the
belly pad and buckle
retainer out of the
buckle slot in the
cover to remove.
– Turn the buckle
retainer sideways
and slide the buckle
out of the belly pad
(see page 39).
e. Remove seat cover.
5. Detach the hook and loop
fasteners on the head
restraint from around the
harness.
6. Remove the head
restraint.
a. Raise the harness to
the highest position.
b. Detach the elastic
straps from the rear
of the head restraint.
7. Ensure the CLICKTIGHT
is open and remove the
lower shell cover.
a. Detach elastic loops
at front of shell.
b. Lift up from the front
to remove the lower
shell cover.
c. Pull cover up at
sides and around
rear-facing belt
paths.
8. Lower the harness, reach
around the head restraint,
and pull the upper shell
cover towards you to
remove.
36
All manuals and user guides at all-guides.com
4d
6b
7a
7b
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
Replacing the Cover
1. Attach one side of the
upper shell cover at the
forward-facing belt path,
pull the cover over the
back of the shell, and
secure at opposite belt
path.
2. Replace lower shell cover.
a. Open the
CLICKTIGHT.
b. Tuck one of the plastic
tabs on the lower
shell cover into the
outer side of the shell
between the forward
and rear-facing belt
paths.
c. Tuck the lower shell
cover around the inner
and outer sides of the
shell from the forward-
facing belt paths to the
front of the child seat.
d. Continue replacing
the lower shell cover
around the seat to the
other forward-facing
belt path and tuck the
second plastic tab
into the shell between
the forward and rear-
facing belt paths.
IMPORTANT:
Ensure shell cover is
secured behind red
markers to allow for
proper function of
CLICKTIGHT.
e. Thread the harness
adjuster strap through
the front of the lower
shell cover.
2a
2b
2c
2d
2e
37