Reinserting The Brew Group - Gaggia Milano ANIMA PRESTIGE Instrucciones De Uso

ENGLISH
18
4219-450-03601 MANUAL GAG. ANIMA CLASS-PREST. EN-ES-PT.indd 18
3 Insert a tablet for the removal of fat coffee residues in the compartment of pre-
ground coffee.
4 Press the ESPRESSO LUNGO button. The machine dispenses water from the
coffee dispensing spout.
5 When the progress bar is halfway, switch the main power button on the back of
the machine to "0".
6 Let the solution for the removal of fat coffee residues act for about 15 minutes.
7 Switch the main power button to "1". Press the Stand-by button.
8 Wait for the machine to perform an automatic rinse cycle.
9 Perform the "Brew Group Cleaning under Running Water" operation.
10 Remove the drip tray and the coffee grounds drawer. Empty them and insert
them in the machine again.
11 Press the AROMA STRENGTH button and select pre-ground coffee.
12 Press the ESPRESSO LUNGO button. The machine dispenses water from the
coffee dispensing spout.
13 Repeat steps 11 and 12 twice. Throw away dispensed water.

Reinserting the brew group

1 Before reinserting the brew group into the machine, ensure the two yellow
reference indicators on the side coincide. If this is not the case, perform the
following step:
Ensure that the lever is in contact with the brew group base.
2 Ensure that the yellow locking hook of the brew group is in the right position.
To correctly position the hook, push it upwards to the highest position.
03/12/2018 15:01:31