Assembly; Hardware Components - Mi-T-M OUTDOOR MH-0075-OD10 Manual Del Operador

Note: Tools required: medium phillips screw driver.
ASSEMBLING HANDLE
1. Align the holes in the upper housing with the 2 holes in the handle as shown.
2. Insert and tighten screws securely with screw driver.
ASSEMBLING CORDWRAP
1. Insert tabs on cordwrap into slots in shell support, lining up the holes
on the cordwrap with those on the side cover.
2. Insert and tighten screws securely with screw driver.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A FUEL SOURCE.
Cord Wraps (2)
Kerosene Portable Heaters Manual

ASSEMBLY

HARDWARE COMPONENTS

Carry Handle (1) 10 mm Screws (2)
Handle
13 mm Screws (2)
Screw
11