Maxi-Cosi Fero Manual De Instrucciones página 20

12. The rigid parts and the plastic sections of a child restraint device
should be positioned and installed in such a way that they cannot,
under normal conditions of use of the vehicle, become trapped
under a moving seat or in the vehicle door.
13. Do not use the child restraint device without the cover. Do not
replace the seat cover with a cover other than that recommended
by the manufacturer, because it will have a direct effect on the
functioning of the child restraint.
Warning:
The Maxi-Cosi Fero/FeroFix must only be installed in the car
in a forward-facing position.
20
EN
Environment
Keep all plastic packaging materials out of reach of your child to avoid
the risk of suffocation.
For environmental reasons, when you have stopped using this product,
we ask that you dispose of the product in the proper waste facilities in
accordance with local legislation.
Questions
If you have any questions, contact your local Maxi-Cosi retailer (see
www.maxi-cosi.com for contact information). Make sure that you have
the following information on hand:
- Serial number on the orange ECE sticker at the bottom of the
Maxi-Cosi Fero/FeroFix base;
- Car make and model and seat on which the Maxi-Cosi Fero/FeroFix
is used;
- Age, height and weight of your child.