KlipXtreme TwinBuds II Manual Del Usuario página 5

depending on the mobile device used, on
the usage profile, and on the calling/ listening
habits of each individual user.
8. The low battery prompt or a tone will be
heard to let you know that the voltage is
below the acceptable level to continue
operating properly.
Note: *If earphones are not charging, make
sure that the contact points for charging on
the earbuds are clean and free of any
foreign material. Lightly wipe clean the
contact points on both the charging case
and the earphones as well. Test again.
3.2. Turning your earphones on or o
1. To turn your earphones on, press and hold
the Multifunction button on each one for
about 4 seconds. The "Power on" prompt
will be heard, and the LED in one of the
earphones will light up in blue and the other
one will start blinking red and blue.
2. As both earphones synchronize, a prompt
will be heard indicating that the device is
connected. Once the device is paired the
blue LEDs on both earphones will blink
every 4 seconds.
3. To turn the earphones off, press and hold
the Multifunction button on each one for
about 4 seconds. The "Power off" prompt
will be heard, and the red LED blink briefly
on both sides upon shutting off.
3.3. Wearing your earphones
• The earphones are intended to fit
comfortably for all day hands-free wearing.
• Select the tip that best fits the size of your
ear canal. Gently push the earphone into
your ear and accommodate the ear fin in
the outer ear. The earphone should rest
securely and comfortably in your ear when
properly inserted.
• Voice quality when speaking will be best
when there are no obstacles between the
mobile phone and earphones, including
your body.