Impecca IPAC-08K Manual De Usuario página 8

InsTAllATIon InsTRUCTIons (ConTInUeD):
WATeR DRAInAGe:
Certain functions of your air conditioning unit create condensation and must evacuate accumulated water .
Please carefully follow these instructions according to your operating and usage conditions .
DehUMIDIFyInG MoDe: Remove the drain plug from the back of the
unit, install the drain connector(5/8" universal female mender) with 3/4"
hose (available in a local hardware store) . For the models without drain
connector, just attach the drain hose to the hole . Place the open end
of the hose directly over the drain area in your basement floor . Refer to
figures F & G .
When the water level of the bottom tray reaches a predetermined level,
the unit beeps 8 times, the digital display area shows P1 . At this time
the air conditioning/dehumidification process will immediately stop .
The fan motor will continue to operate—this is normal .
Carefully move the unit to a draining location, remove the bottom
drain plug and let the water evacuate (see Figure H) . Restart the ma-
chine until the P1 symbol disappears . If the error repeats, call for ser-
vice .
noTe: Be sure to reinstall the bottom drain plug before using the
unit .
$$$ sAve & ConseRve eneRGy
• Use the unit in the recommended room size .
• Locate the unit where furniture cannot obstruct the air flow .
• Keep blinds/curtains closed during the sunniest part of the day .
• Keep the filters clean .
• Keep doors and windows closed to keep cool air in and warm air out
6