Accessories; Hose, Extension Wand & Cleaning; Tool Storage - Workshop WS0500WM0 El Manual Del Propietario

hose, extension Wand, and
cleaning Tool storage
1. Slide the extension wands at the far
sides of the Accessory Storage Bin
located on the right side of the Wall
Mounted Vac. Slide the car nozzle and
the crevice tool next to the extension
wands in the storage bin. Position the
dusting brush horizontal and slide it
into the storage bin's accessory slot. It
is necessary to place the dusting brush
into the accessory slot first, as the
utility nozzle will not fit in this position.
Last, place the utility nozzle flush
against the accessory slot storage area
and slide down into storage position.
The storage bin accommodates both
extension wands and the four cleaning
tools.
Accessory
Slot Storage
Area
Extension
Wands
Car Nozzle

AccessoRIes

Crevice
Tool
Utility
Nozzle
Dusting Brush
2. Insert the 7 foot Expandable Locking
Hose ends into the hooks on the left
side of the Wall Mounted Vac, as
shown below.
3. Form a double loop with the 14 foot
Locking Hose and hang on hose
storage hook at the top of the rack.
14 Foot
14 Locking Hose
Tug-A-Long Hose
7 Expandable
Super Flex
Locking Hose
Hose
10
Storage
Storage
Accessory Bin
Accessory Bin
Containing
Containing 2
2 Extension
Extension Wands
Wands and
and 4 Cleaning
4 Cleaning Tools
Tools