Hand Look Quilting Stitch; Automatic Bar-Tack And Darning - Singer C440 Manual De Instrucciones

Ocultar thumbs Ver también para C440:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Hand Look Quilting Stitch (No. 160)
Use invisible nylon sewing thread or very lightweight thread
that matches or blends well with the fabric on top. Place thread
that contrasts to the color of the fabric on the bobbin. Set the
upper tension to maximum or near maximum. When you sew,
bobbin thread will pull to the top and give the appearance of
a traditional hand quilting stitch. Adjust the thread tension and
stitch length as desired for the look you want to achieve for
your project.

AUTOMATIC BAR-TACK AND DARNING

You can sew automatic bar-tack and darning using the
Buttonhole Foot.
No. 16 Bar-tack, to reinforce areas that will be subject to strain,
such as pocket corners.
No.17 Darning, mending and other applications.
Buttonhole Foot
1.
Adjust slide on base of Buttonhole Foot according to the
length of the bar-tack or darning to be sewn.
a= Length of bar-tack or darning
2.
Pass upper thread through the hole of Buttonhole Foot and
bring upper thread to the left.
3.
Position fabric under presser foot so that the starting point
is on the thick area.
Lower the foot.
b. When sewing the bar-tack on the edge of thick fabric, such
as a pocket, place a cardboard or fabric piece of the same
thickness beside the fabric to help keep the foot level as
you sew.
4.
Lower the Buttonhole Lever completely.
NOTE: Machine will not start to sew if Buttonhole Lever is not
lowered properly or Buttonhole Foot is not positioned correctly.
5.
Hold upper thread lightly and start the machine.
6.
Machine will sew bar-tack or darning stitch, as shown.
Machine will stop automatically when the pattern is
finished.
7.
Raise the presser foot to remove the fabric.
Sewing
32
1
2
3
4
1
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C440q

Tabla de contenido