Safety Precautions; Intended Use - SEA HALF TANK 270 Manual De Instalación

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
RISK EXAMINATION
The points indicated by arrows in Fig. 32 are potentially dangerous. The installer must take a thorough risk
examination to prevent crushing, conveying, cutting, grasping, trapping so as to guarantee a safe installation for
people, animals and things. As for misunderstandings that may arise refer to area distributor or call
accident due to a failure to comply with the instructions herein. The guarantee will be void and the manufacturer
responsibility will be nullified if SEA S.p.A. original spare parts are not being used. The electric installation shall be
carried out by a professional technician who will release documentation as requested by the laws in force. Packaging
materials such as plastic bags, foam polystyrene, nails etc. must be kept out of children's reach as dangers may arise.
INITIAL CHECK AND PUTTING IN SERVICE
After having completed all necessary operations, for the correct installation of the product
HALF TANK, described in the present manual and after having valued all resting risks which could arise in whatever
installation is necessary to test the automation to guarantee the max. security and in particular way to
guarantee the respect of what foreseen by the law and the normatives in force. In particular the test must be
executed following the EN12445 ruel which establishes the testing methods for the testing of the gate operators
respecting the established limits by the EN 12453 law.

SAFETY PRECAUTIONS

All electrical installation work should conform to current regulations.
A 16A - 0,030A differential switch must be incorporated into the source of the gate main electrical supply and the
entire system must be properly earth bonded.
Remember to separate mains (230/115 V) carrying cables from low voltage control cables.

INTENDED USE

The Electrohydraulic Half Tank in all his versions has been planned to be used exclusively for the automation of
swing gates
SPARE PARTS
To obtain spare parts contact: SEA S.p.A. ZONA Ind.le, 64020 S.ATTO Teramo Italia
SAFETY AND ENVIRONMENTAL COMPATIBILITY
Please dispose of the product and circuit packing materials in a responsible and appropriate way.
When being transported this product must be properly packaged and handled with care.
MAINTENANCE AND DECOMMISSION
The decommission and maintenance of this unit must be carried out by specialised and authorised personnel only.
LIMIT OF GUARANTEE
For the guarantee see the sales conditions on the official SEA price list.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY
CAUSED BY IMPROPER USE OF THIS PRODUCT.
SEA reserves the right to do changes or variations that may be necessary to its products with no obligation to
notice.
28
67410873
®
Fig. 32
REV 05 - 12/2012
our help desk. These instructions are part of the device
and must be kept in a well known place. The installer
shall follow the provided instructions thoroughly. SEA
S.p.A. products must only be used for the automation of
doors, gates and wings. Any initiative taken without SEA
S.p.A. explicit authorization will preserve the
manufacture from whatsoever responsibility. The
installer shall provide warning notices on not assessable
further risks. SEA S.p.A. in its relentless aim to improve
the production, is allowed to make whatsoever
adjustment without giving notice. This does not oblige
SEA S.p.A. to up-grade the past productions. SEA S.p.A.
can not be deemed responsible for any damage or
accident caused by product breaking, being damages or
HALF TANK
ELECTROHYDRAULIC
English English
ELECTROHYDRAULIC