Installation, Electric - Festo DDLI-25 Instrucciones De Utilizacion

DDLI-25/32/40
For control of the DDLI:
• Use proportional directional control valve MPYE or VPWP for
speed control and positioning (example of circuit
circuit is not suitable for stopping the slide in the event of a
pressure failure.
If used as a measuring cylinder:
• Use the one-way flow control valves GRLA for setting the speed
and, in addition, external stops.
5.3

Installation, electric

• Wire the DDLI to the earth potential.
The internal thread (A) of the cover screws can be used for this
purpose, for example (
• Wire the measuring system connection 1 to the control system.
Only the existing cable may be used for this purpose.
Size
Female thread (A) of the cover screws
Max. tightening torque
Tab. 5
Pin allocation DDLI:
Pin Function
1 24 V DC
2 n. c.
3 0 V
4 CAN_H
5 CAN_L
– Screening
Tab. 6
Festo – DDLI-25/32/40 – 1306NH English
Tab. 5).
[Nm]
Fig. 8). This
Fig. 8
(A)
Fig. 9
25 32
M4 M5
3.0 4.0
Pin allocation
5 ìm
1
40
M5
5.0
27