Kalorik FT 44466 Manual De Instrucciones página 19

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not attempt to attach the magnetic plug permanently to
the appliance.
Ensure the oil container is in place, then turn the oil filtration control
knob to FILTER OIL position to empty the oil reservoir (see Oil
filtration).
Place the basket on a clean, flat and heat resistant surface.
Danger of burns!
Ensure the basket cooled down completely before touching its
surface and attempting to remove the basket handle.
Ensure the oil cooled down completely before emptying the oil
reservoir into the oil container.
Remove the basket handle from the basket.
Remove the control panel assembly from the oil reservoir. Carefully
clean the control panel assembly and immersion heater with a
damp cloth.
Pull the oil filter cover from the oil reservoir and then remove the oil
reservoir from the housing.
Open the lid filter cover and remove both black and white filters.
Clean the appliance housing with a damp cloth.
Wash the lid, basket, basket handle, oil reservoir and oil filter cover
with hot soapy water or in a dishwasher. Rinse and dry carefully.
Dry all parts thoroughly after cleaning and before using the
appliance again.
NOTE:
If the oil container needs to be cleaned, ensure it is empty
before attempting to clean (see Emptying the oil container).
Wash with hot soapy water or in a dishwasher. Rinse and dry
carefully.
Clean the filters every 3 months or after every 12 uses with hot
soapy water. Do not clean in a dishwasher.
Dry all parts and surfaces thoroughly before use. Make sure that
all parts and surfaces are completely dry before connecting the
appliance to a wall outlet. Even a small amount of water can
cause severe splattering of hot oil.
CLEANING THE FILTRATION SYSTEM:
www.KALORIK.com
19
FT 44466 - 180330

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido