Tabla de contenido
Publicidad
Temperature Control Panels
Refrigerator Temperature Control
Setting the Temperature Control
•
To control the internal temperature, adjust the control dials according to the ambient temperature or
purpose of use.
•
The first time you turn the unit on, set the temperature control to "MAX" in refrigerator section and
"MAX" in freezer section.
•
The range of the temperature control is from position "MIN" the warmest to "MAX" the coldest in
refrigerator section and from position "MIN" the warmest to "MAX" the coldest in the freezer section.
After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs. The
setting of "MED" in refrigerator section and "MED" in freezer section should be correct for home or
office refrigerator use.
NOTE:
IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
TURNING THE REFRIGERATOR TEMPERATURE CONTROL TO "OFF" POSITION STOPS THE
COOLING CYCLE BUT DOES NOT SHUT OFF THE POWER TO THE UNIT.
USE OF THE ICE CUBE TRAYS
•
For your ice requirements, fill approximately ¾ of the tray after washing it.
•
Slide the tray onto the ice cube shelf.
•
Remove the ice cubes from the ice cube tray by twisting the ice tray knobs. Make sure the ice
cube container is beneath the ice cube tray. (See diagram below.).
OPERATING YOUR APPLIANCE
10
Freezer Temperature Control
Publicidad
Tabla de contenido
