Energy Saving Tips; Replacing Your Light Bulb - Avanti FF760W Manual De Instrucciones

Energy Saving Tips

•
The unit should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing them in the unit. Overloading the unit forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the freezer.
•
Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.

Replacing Your Light Bulb

NOTE:
All parts removed must be saved to do the replacement of the light bulb.
Before removing the light bulb, either turn off the appliance or disconnect the electricity leading into
the appliance at the main power supply. Failure to do so could result in electrical shock or personal
injury.
•
Unplug the AC power cord from the wall.
•
Remove the screw with a Phillips screwdriver.
•
Pull down to remove the lamp cover.
•
Unscrew the bulb.
•
Replace with a 10-watt bulb that is the same shape and size.
•
Replace the lamp cover and tighten screws.
12