AO Smith AO-US-RO-MB-4000 Manual Del Proprietário página 10

STEP 5 - Install drain connector
1
Identify drain outlet location. Do not install the drain connector onto the same
drain pipe as the garbage disposal. If drain-line must be installed on the same line
as garbage disposal, do not use the drain connector included. A garbage disposal
connector is recommended.
4
Use drain connector to mark drill location
on drain-line. Drill a 7/32" hole on the
drain pipe. Do not penetrate opposite
side of pipe.
5
Position the drain connector on sink
drain pipe above drain trap, allowing
room for drilling.
6
Securely tighten nuts (M) and screws (M).
PRO TIP
If there is leakage from the drain bracket, loosen the bolts and slide the bracket up so the drilled hole is at
the bottom of the drain connector port.
WARNING
Ensure all electrical appliances and
outlets are turned off at the circuit breaker before
working in the cabinet area.
2
Remove protective cover from back of
foam seal (N).
N
L
M
3
Knock center hole out, align holes, and
attach to front plate of drain connector (L).
DRAIN PIPE
BRACKET
NEW HOLE
CAUTION Wear safety glasses to
protect eyes when drilling.
NEED HELP? GIVE US A CALL 877.333.7108
7
M