AO Smith AO-US-RO-MB-4000 Manual Del Proprietário página 11

INSTALLATION GUIDE
8
STEP 6 - Connect tubing
1
Brass Tee to Manifold "INLET"
(1/4" white tubing)
Take the white tubing leading from the
brass tee and insert it into the Manifold
port labeled "INLET". Push the tubing
all the way in until it stops.
2
Manifold to Remineralizer
with Microbial Filter
(3/8" red tubing)
Insert one end into the Manifold
port labeled "FAUCET".
Insert the other end into the
Remineralizer with Microbial Filter
port labeled "INLET".
DO...
Insert tubing all the way (.95") to prevent leaking.
Wet end of tubing for an easy install into inlets and outlets.
Cut excess tubing to prevent crimping, kinks, loops or folds.
NEED HELP? GIVE US A CALL 877.333.7108
3
Remineralizer with Microbial Filter
to Faucet
(3/8" white tubing already attached to faucet)
Insert the 3/8" white tubing (from STEP
3 - Install RO faucet) from the faucet into
the Remineralizer with Microbial Filter
port labeled "OUTLET".
"
1
Diagram is actual size.
DO NOT...
Cut tubing too short. Always double-check
measurements before cutting.
Bend, crimp or kink tubing.
Discard excess tubing.
Depth to insert tubing
2