Maintenance; Troubleshooting; Disposal - Imetec Bellissima Zero Pro Dual Instrucciones De Uso

EN

maiNtENaNcE

WarNiNG! always disconnect the appliance from the
mains supply before cleaning or performing maintenance.
clEaNiNG aND storiNG
It is recommended to clean the appliance and the treatment surface (1A) after each
hair removal session:
• Disconnect the appliance from the power supply (8) before cleaning it.
• Clean the surface of the handpiece and the treatment surface (1A) gently, with
a dry, clean cloth.
• Store the appliance in a cool and dry place, away from heat and water.

trouBlEsHootiNG

1. Make sure the plug (8) is inserted correctly into the power supply connection
the appliance
(3).
does not go on
2. Make sure the plug (8) is inserted into a wall socket.
When i press
the pulse 1. Make sure that the hand holding the appliance is touching the galvanic
activation energy base electrode (7). To activate the galvanic energy it is necessary to
button (2) press the pulse activation button (2) as your hand touches the galvanic energy
the galvanic base electrode (7) and the skin on the area to be treated is also touching the
pulse is not galvanic energy contact electrode (1C) at the same time.
delivered
58
1. Make sure the skin colour/device-is-ready LED (5C) flashes, which indicates
good contact with the skin, and the surface treatment (1A) is evenly and firmly
pressed on the skin. OR
2. Verify the skin colour/device-is-ready LED (5C): if it flashes rapidly, the skin
tone is too dark for safe application. Try to use the appliance on another part of
No light is
emitted when the body or contact the IMETEC service centre. OR
the pulse 3. Check the green power level LEDs (5B): a system error is present if one or
activation more power level LEDs (5B) flash while the skin colour/device-is-ready orange
button (2) is LED (5C) remains off. If the problem persists, contact the IMETEC Customer
pressed Service Centre. OR
4. Verify whether the skin colour/device-is-ready orange LED (5C) and
the green power level LEDs (5A) are flashing all at once. If this happens,
disconnect the device from the power supply. The device has completed its
operational life cycle and must be disposed of properly.

Disposal

The product is packaged in recyclable materials. Dispose of packaging in
accordance with the environmental protection standards.
Pursuant to Art. 26 of Italian Legislative Decree no. 49 of 14 March 2014
"Implementation of Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE)", the crossed bin symbol on the appliance or its
packaging indicates that the product must be disposed of separately from
other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for
electrical and electronic equipment. Alternatively, instead of handling the disposal,
the appliance can be handed over to the retailer when a new, equivalent appliance
is purchased. Retailers of electronic products having a sales area of at least 400
m2 can also be handed electronic products that are to be disposed of measuring
EN
59