TELESCOPIC RACK
The sliding shelf telescopic rack can be used in the
UPPER or LOWER oven in any rack position.
Open Position
A
Closed and Engaged Position
CAUTION
• DO NOT cover racks with aluminum foil.
- This will result in poor baking caused by
interrupted heat distribution.
• Always arrange oven racks when the oven
is cool.
• Do not place aluminum foil or any other
material on the oven bottom.
• Remove all racks including the telescoping
rack and frame when using a self clean
cycle.
14
A. Telescopic rack
B. Frame
A
B
A. Telescopic rack
B. Frame
Installing the Telescoping Rack
Step. 1
Start with the rack in the "Closed" position. Place one
hand in the front near the center, and place your other
hand near the right rear corner.
B
Step. 2
Carefully insert rack between the rack guides, to the
back of the oven until the shelf slides into place.
Step. 3
Once the rack is secured in the back, pull the entire
rack forward until the rack locks into place.
NOTE: Be sure that the rack is securely positioned
and level before use.
Removing Telescopic Rack
Step. 1
With the rack in the "Closed" position, grasp the front
of the rack and frame and lift up. Slowly push the rack
towards the back wall.
Step. 2
After pushing rack/ frame towards the back wall lift the
rear of the rack, and pull the entire rack and frame out
between the rack guides.
Rack guides