CyberPower PR3000ELCDRTXL2U Manual De Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BATTERY REPLACMENT PROCEDURE:
1. Remove the front panel on the
right side.
3. Remove the cable protection
cover.
5. Remove the three retaining
screws.
REMINDER! The used batteries are hazardous wastes and must be disposed through recycling. Most retailers
that sell lead-acid batteries collect used batteries for recycling, as required by the local regulations.
9
BATTERY REPLACEMEN (continued)
2. Remove the one retaining screw of
the cable protection cover.
4. Disconnect the black wire and red
wire from the battery.
6. Put the new battery packs back into the
compartment. Tighten up the screws and
replace the cable protection cover and the
front panel. Recharge the unit for 12
hours to ensure the UPS performs
expected runtime.
Copyright © 2015 CyberPower Systems, Inc.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido