Publicidad
Please read instructions carefully before installation.
Check the contents of kit. Contact your YAKIMA dealer if any parts appear missing or damaged.
Clean your platform prior to fitting the LockNLoad Spare Wheel Holder.
Place these instructions in the vehicle's glove box after installation is complete.
1
LOAD TIRE.
Load the spare
wheel onto the
Platform. Center the
spare wheel on the
Platform for optimal
load distribution.
NOTE: Top view
of LockNLoad
Platform B
shown.
2
ASSEMBLE THE EYE BOLTS.
Loosely thread two M10
washers and an M10 nut
plate onto each eyebolt.
Instruction #80-13-032-Rev 2 - Page 2 of 6
3X
Publicidad
