Aiwa XR-DV3M Manual De Instrucciones página 9

4 Connect the AC cord to an AC outlet.
Concerning the demo display
When the AC cord is plugged into an AC outlet for the first time
after purchase, a demo display will appear in the display window.
When the power is turned on, the demo display will end. When
the power is turned off, the demo display will appear again.
Until the clock is set, the demo display will appear whenever the
power is turned off. (For setting the clock, see page 36.)
NOTE
• To connect an external TV set, see page 38.
• To see the demo display after setting the clock, press DEMO/
ECO while the power is off. To terminate the demo display, press
DEMO/ECO again.
To stand the AM antenna on a surface
Fix the claw to the slot.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T-shape and fix its ends to
the wall.
AM loop antenna:
Position to find the best direction.
NOTE
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
• Do not connect any speakers to the unit other than the supplied
ones.
• Do not leave objects generating magnetism near the speakers.
• Do not bring the FM antenna near metal objects or curtain rails.
• Do not bring the AM antenna near other optional equipment, the
stereo system itself, the AC cord or speaker cords, since noise
will be picked up.
• Do not unwind the AM antenna wire.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to the FM 75 Ω terminals.
To connect other optional equipment page 38.
En
7
ENGLISH