Aiwa XR-DV3M Manual De Instrucciones página 22

c
r,t
PBC
FAST FORWARD/REVERSE PLAY
Hold down r or t during play until the guide
display such as "g x 2" appears.
The DVD is played 2 times faster than the normal speed.
The VCD is played 5 times faster than the normal speed.
To return to normal play, press c.
To change the playing speed
During fast forward/reverse play, hold down r or t until the
guide display appears.
For DVDs, this operation switches the playing speed between 2
times, 8 times and 32 times.
For VCDs, this operation switches the playing speed between 5
times and 16 times.
To return to normal play
Press c.
NOTE
• There is no audio during fast forward/reverse play.
• Fast forward and reverse play are not possible with certain DVDs.
SKIPPING
Press r or t during play.
With each press of t, the disc position skips to the succeeding
track.
When r is pressed once, the disc position skips back to the
beginning of the current track/chapter.
When r is pressed twice or more, the disc position skips back
to the previous track(s)/chapter(s).
NOTE
Skipping is not possible with certain DVDs.
20
ENGLISH
PLAYING A VCD WITHOUT USING
0-9,+10
PLAYBACK CONTROL (PBC)
PBC
With PBC (PlayBack Control), play of VCDs is controlled from the
menu display on the monitor screen, and the menu display appears
automatically after play of each selection.
You can, however, choose to set PBC off, and play the entire VCD
SHIFT
without returning to the menu display, just like audio CDs.
c/d
This, for example, allows you to use repeat and programmed play
r,t
for VCDs with PBC.
For more information on PBC, see "TYPES OF VIDEO CDS",
page 17.
1 Load the VCD.
2 Press PBC on the main unit during play or in stop
mode.
Alternatively, press PBC while pressing SHIFT on the remote
control.
"PBC" disappears from the display, and the play using menu is
disabled.
NOTE
• If PBC is pressed while pressing SHIFT during play, play stops
before the PBC mode changes.
• You can set the unit's preference whether to play VCDs with
PBC or not. See "PBC", page 47.
SELECTING A TRACK WITH THE REMOTE
CONTROL (VCD ONLY)
A track can be selected directly by entering the track number on
the remote control, either during play or in stop mode.
To use this feature with VCDs that support PBC, turn off PBC first
(see "PLAYING A VCD WITHOUT USING PLAYBACK CONTROL"
on this page).
Press the numbered buttons for the desired track.
Example:
To play track 12, press +10, 2.
To play track 20, press +10, +10, 0.
Play begins at the beginning of the selected track and continutes
to the end of the disc.