INSTALLING/REMOVING THE MULCHING PLUG
•
To remove the mulching plug, lift the rear discharge
door (1).
•
Grasp the handle (2) of the mulching plug.
Lift and pull the mulching plug out using the handle.
•
The mulching plug (3) is in serted at an angle, so it requ
ires some force to remove it.
•
The mulching plug must be removed in order to inst all
the grass catc her bag.
•
The mulching plug must be re-inst alled when the grass
catc her bag is removed.
NOTE: When mulching, do not install
either the side discharge deflector or the
grass catcher bag.
INSTALLING SIDE DISCHARGE CHUTE
•
Lift the side discharge cover (1).
•
Align the grooves (2) on the discharge chute (3) with
the pins (4) on the underside of the discharge cover (1).
•
Lower the discharge chute until the hooks on the mower
deck are secured in the openings in the discharge chute.
•
Release the side discharge cover.
NOTE: When using side discharge, do not
install the the grass catcher bag. Ensure
the mulch plug is installed.
TO INSTALL/REMOVE BATTERY PACK
TO INSTALL BATTERY PACK
•
Lift and hold up the battery door (1).
•
Align the battery (2) with the mower's battery port.
•
Make sure the battery release button (3) snaps in place
and that battery is fully seated and secure in the mower
before beginning operation.
•
If the machine is not going to be used immediately,
remove the battery.
TO REMOVE BATTERY PACK
•
Release the bail lever to stop the mower.
•
Press the battery release button (3) on the mower. Open
the battery door.
•
Remove battery from the mower.
1
2
3
4
2
2
59
EN
1
3
1
3