Mulching Tips - Greencut GLM560L-20 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

62

MULCHING TIPS

NOTE: Inspect the area where the mower is to be used, and remove all stones, sticks, wire, bones,
and other debris that might be thrown by the rotating blade.
Release the bail lever to turn the mower OFF when crossing any graveled area (stones can be thrown by the
blade).
Set mower to the highest cutting height when mowing on uneven ground or in tall weeds.
For effective mulching, do not cut wet grass, because it tends to stick to the underside of the deck, preventing
proper mulching of grass clippings. New or thick grass may require a narrower cut. The ground speed should be
adjusted to the condition of the lawn. If mowing has been delayed and the grass has been allowed to grow longer
than 4" (10 cm), mow the lawn twice in order to reduce the grass height to a maximum of 3 1/4" (8.3 cm).
Walk at a steady pace. Overlap the cutting rows. Do not let the grass get too tall. If the grass gets too long, start
at the highest cutting position and work down to the desired cutting height.
ATTENTION: If you strike a foreign object, stop the motor and remove the battery.
Thoroughly inspect the mower for any damage. Repair any damage before operating the mower.
Excessive vibration of the mower during operation is an indication of damage. Thoroughly inspect
the mower and repair any damage before operating the mower.
EMPTYING THE GRASS CATCHER BAG
Stop mower, allow blades to completely stop, and remove
the battery.
Lift the rear discharge cover.
Lift the grass catcher bag by its handle to remove from mower.
Empty grass clippings.
Lift the rear discharge cover and reinstall the grass catcher
bag as described earlier in this manual.

Publicidad

Tabla de contenido
loading

Tabla de contenido