(3) PARKING BRAKE LEVER
The parking brake has two positions. In position (1) the brake is not active,
after shifting to position (2) while stepping down on brake pedal the parking
2
brake is activated (will brake).
Stepping on the brake pedal will deactivate the parking brake and the lever will
1
automatically be released and shift to position (1).
(4) TRAVEL DIRECTION LEVER
It controls the power supplied to the rear wheels and regulates the speed of the machine in both
directions. In the basic setting it is equipped with a mechanical cruise control function, which is
automatically deactivated by pressing the brake pedal.
Changing the travel direction from forward to reverse or from reverse to forward
is only possible after stopping the machine. When the brake pedal is stepped on
the gear stick automatically shifts to position „N".
(5) THROTTLE LEVER
Serves to regulate the engine speed. It has the following three positions:
(6) CHOKE
For starting a cold engine:
Forward
Moving the lever closer to the letter F corresponds to a
F
travel
higher speed and vice versa
N
Neutral
The machine is still
Reverse
Moving the lever closer to the letter R corresponds to a
R
travel
higher speed and vice versa
MAX
MIN
CHOKE
Maximum engine speed
Minimum engine speed (idle)
Starting a cold engine
23