Britax ENDEAVOURS Guia Del Usuario página 11

BRITAX Child Safety, Inc.
Lap Belt Installation
IMPORTANT: The lock-off does NOT secure this type of
vehicle belt. Vehicle belt MUST be locked according to
your vehicle owner's manual.
1. Place the base on the
vehicle seat and then pass
the vehicle belt through the
belt route.
2. Ensure that the vehicle
seat belt is not twisted and
buckle.
16
3. Press the base firmly into
the vehicle seat while
removing all slack from the
vehicle seat belt.
Base Installation with Lap Belt
CHECKLIST
ü Check that the vehicle belt is tight and that the base
is secure. The base is secure when it moves less
than 1 inch (2.5 cm) front-to-back or side-to-side at
the vehicle belt path.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
ENDEAVOURS User Guide
17