Using Without The Base; Adjusting The Recline Angle - Britax ENDEAVOURS Guia Del Usuario

BRITAX Child Safety, Inc.

Using Without the Base

Before installing the Infant Car Seat:
• Secure the child in the infant car seat before installing
the car seat in the vehicle.
• Check that your vehicle seat belt is compatible with
the infant car seat by referring to your vehicle owner's
manual and page 38 in this user guide.
• Check your vehicle owner's manual to determine how
to lock your vehicle belt system.

Adjusting the Recline Angle

IMPORTANT: Vehicle must be parked on a level surface.
• When installed, the level
line on the shell of the
infant car seat should be
level to the ground.
20
If there is a problem achieving the proper recline angle after
installing, try another approved seating position in your
vehicle or:
a. Uninstall the car seat and remove it from the
vehicle seat.
b. Place one rolled towel
or one or more pool
noodles in the vehicle
seat bight.
c� Place the car seat
against the towel or pool
noodle(s) to level the
shell and install�
ENDEAVOURS User Guide
21