Setting The Clock And Delay Brew Time; Preparing For Use; Suggested Coffee Measurement Chart - Mr Coffee PJX Serie Manual Del Usuario

SETTING THE CLOCK AND DELAY BREW TIME

To Set the Clock:
1. Plug the power cord into a
standard electrical outlet. The
clock will flash on the control
panel to indicate that the time
has not been set yet.
2. Press and hold the HOUR
and MINUTE buttons until you
reach the current time. The
AM and PM will light up on the
left side of the display
(Figures 1 and 2) .
NOTE: Pressing any button before
setting the clock will cause the
clock to start keeping time from
12:00 a.m. You must set the clock
if you want to use the Delay Brew
feature.
To Set the Delay Brew Time:
While the display is in the clock
mode, simply press the SET DELAY
button (Figure 3) and, while the
DELAY BREW time is flashing , set
the brew time by pressing the
HOUR and MINUTE buttons. The
AM and PM will light up on the left
side of the display (Figure 4).
Within a few seconds the display
will change to the current time.
The Delay Brew Time is now set!
NOTE: To activate the DELAY BREW
cycle, see the "Brewing Coffee
Later" section.
To check the programmed time,
BVMC-PJX Series_15ESM1.indd 11-12
Figure 1
Figure 2
Figure 3
Figure 4
10
push the SET DELAY button. The display will show the time
you have programmed the coffee to brew. If you press the
SET DELAY button again or wait a few seconds , the display
will switch back .

PREPARING FOR USE

Selecting and Measuring Ground Coffee:
For best results, use a level tablespoon for ground coffee
measurement.
Make sure you use medium grind coffee for a perfect brew.
A. Suggested Coffee Measurement Chart:
To Brew Ground Coffee
12 Cups 9 tbsp.
10 Cups 7.5 tbsp.
8 Cups 6.5 tbsp.
6 Cups 4.5 tbsp.
4 Cups 3 tbsp.
1 level tablespoon
(tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of
brewed coffee
Use more or less coffee
to suit your taste.
11
5/28/15 11:36 AM