Ff. Inserting Growth Spacer Into Cross Tube - Ki Mobility Rogue XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR

FF. Inserting Growth Spacer into Cross Tube

Reference Section Y, Growing Your Rogue XP in Width, prior to starting this step.
a. Loosen and remove M6 button head screws located on both sides of the cross tube.
b. Remove existing spacer.
c. Insert new spacer for desired width growth into either the left or right side of the cross tube.
d. Align holes in spacer with holes in cross tube and insert M6 screws into aligned holes.
Loosely tighten screw.
e. Repeat above step on opposite side of spacer.
f. Fully tighten M6 screws.
52