Kapro PROLASER 875 GREEN Manual Del Usuario página 20

5) Press the push button H (#1), to turn off the horizontal beam.
6) Use the micro – adjustment knob (#5), to turn the laser, so that
the vertical beam will merge with the plumb line below the
hanging point.
7) Mark point a2 on the wall, in the middle of the vertical beam at
the same height of a1. (see figure 8).
8) The distance between a1 and a2, should not be more than
1mm, otherwise send the laser level to a qualified technician
for repairs.
9) Repeat the same procedure to check all other 3 vertical beams.
20
a2 a1
XX
2m
Figure # 8
Figure # 8