STERWINS 40 VLM2 - 36P.1 Instrucciones De Montaje página 323

If the product is dropped, suff ers heavy impact or begins to
vibrate abnormally, immediately stop the product and
inspect for damage or identify the cause of the vibration. Any
damage should be properly repaired or replace by an
authorized service centre.
• To reduce the risk of injury associated with contacting rotating parts, always stop the
machine, remove the battery pack, and make sure all moving parts have stopped:
- before cleaning or clearing a blockage
- when leaving the product unattended
- before installing or removing attachments
- before checking, maintaining or working on the product
- if the machine starts to vibrate abnormally (inspect immediately)
Removing and charging the battery : Illustration 6.1 and battery instruction manual
1. Press the lock button on the top center of the battery to slide it out of the product.
2. Place the battery pack into the charger by sliding it into a locked position until it clicks
3. When the green light is fl ashing, the battery is charging. If the green light is no longer fl ashing, the
battery is fully charged.
5. TRANSPORTATION
Transporting the machine or battery may require that you meet certain requirements specifi c to your
country. Please make sure to respect them by contacting the authorities of your country, in order to
respect them all. Ensure temperature during transportation will never be out of temperature range given
on chapter storage
5.1 TRANSPORT THE MACHINE
Illustration 6.1 to 6.8
Switch the product off and remove the battery pack.
Always carry the product by its handle. Protect the product from any heavy impact or strong vibrations
which may occur during transportation in vehicles. Secure the product to prevent it from slipping or
falling over. Do not expose the product to sunlight..
5.2 TRANSPORT THE LITHIUM BATTERIES
Please refer to the battery instruction manual for further details.
6. WINTERING
Illustration 6.9
Plug out the battery from the power tool.
Before long storage please ensure the battery charge fi t to instructions provided on battery instruction
manual. Follow all instructions given on chapter storage below. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
7. STORAGE
Only store the machine and the battery in a clean, dry, ventilated place with a temperature range of 4°C
to 24°C. Cover it in order to provide added protection. We recommend using the original package for
storage or covering the product with a suitable cloth or enclosure to protect it against dust. Be sure to
secure the unit while transporting
325
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN