Dolmar TM-98.14 H2D Manual De Instrucciones página 104

18
EN
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without applying
the parking brake;
– the parking brake is engaged without disengaging the blades.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several checks and operations to
ensure you can work efficiently and in maximum safety.
5.3.1 Seat adjustment
To change the seat position, loosen the four fixing
bolts (1) and slide it along the slots.
Once you have found the right position, tighten
the four screws (1).
5.3.2 Tyre pressure
Having the right tyre pressure is the main condi-
tion for ensuring that the cutting deck is horizon-
tal and mows evenly.
Unscrew the valve caps and connect a com-
pressed air line with a gauge to the valves.
The pressures are:
FRONT
REAR
1.5 bar (13 x 5.00-6)
1.0 bar (15 x 5.00-6)
1.2 bar
HOW TO USE THE MACHINE
1 1