Switching On; Working - Stihl RE 88 Manual De Instrucciones

English
Cord length Minimum cross-
section
220 V – 240 V:
Up to 20 m 1.5 mm
20 m to 50 m 2.5 mm
100 V – 127 V:
Up to 10 m AWG 14 / 2.0 mm
10 m to 30 m AWG 12 / 3.5 mm
Connection to the power supply socket
Before connection to the power supply,
check that the machine is switched off –
see "Switching off the machine"
Plug the power cord or extension
N
cord into a properly installed outlet
42

Switching On

Turn on water supply
2
N
2
NOTICE
2
The machine may only be switched on
when the water intake hose is connected
2
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
Completely unroll the high-pressure
N
hose
Move the master switch to I – now
N
the machine is in standby mode
Point the spray gun at the object to
N
be cleaned – never at persons!

Working

Actuating the spray gun
Point the spray attachment at the
N
object to be cleaned – never at
persons!
Point the rotary nozzle downwards
N
when starting (if fitted)
2
1
Press the safety latch (1) – the lever
N
(2) is unlatched
Squeeze the lever (2)
N
The motor stops when the lever is
released.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
RE 88