Moving Within The Work Area - Husqvarna MS360 Manual De Instrucciones

Water pump with own on/off valve.
Adjust water flow to bind the cutting dust. The volume of
water required varies depending on the type of job at
hand.
Adjust the water flow to use minimal water as possible
while maintaining the dust reduction.
• The valve on the handle adjusts the flow to the blade.
Turn the water control slightly to adjust the amount of
water on the blade.

Moving within the work area

CAUTION! Stop the motor and
!
disconnect the power cable before lifting
or moving the machine.
• Carry the machine using the extendible handles on
the ends.
• Slide back the extendible handles.
Adjustable stand
The stand can be folded away for easy moving and space
saving.
• Fold away the stand by pulling/lightly lifting the rear
handle and loosening the catch. Press together the
stand and secure when folded.
OPERATING
!
• The integrated wheels allow the saw to be pulled like
a roller bag.
Fixed stand
When moving with the fixed stand, the legs can be stored
in the machine frame.
Lift the machine
• The extendible handles on the saw frame can be used
for manual lifting.
• Belts are used in the lifting eyes when lifting with a
crane.
!
CAUTION! The lock catch must click in
place into its locked position when the
stand is folded.
CAUTION! Lifting hooks must not be
used in the lifting eyes intended for belts.
The use of lifting hooks will risk
damaging the fastenings.
–
English 17