Safety Instructions; Safety Warnings For Dual Function Inflator - Skil PWRCORE 20 IF5940-00 Manual Del Propietário

SAFETY INSTRUCTIONS

WARNING
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE .
Battery tool use and care
Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
Use the inflator only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals together may cause burns or a
fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact . If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 265 °F may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
Service
Have your inflator serviced by a SKIL Factory Service Center or Authorized SKIL
Service Station . This will ensure that the safety of the inflator is maintained.
Never service damaged battery packs . Service of battery packs should only be performed
by the manufacturer or authorized service providers.

SAFETY WARNINGS FOR DUAL FUNCTION INFLATOR

Household use only .
Know your inflator. Read operator's manual carefully. Learn its applications and limitations,
as well as the specific potential hazards related to this tool. Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Risk of bursting . Do not preset the inflator to result in an output pressure greater than
marked maximum pressure of item to be inflated. Do not use at pressure greater than 160
PSI.
To reduce the risk of electric shock, do not expose to rain . Store indoors .
Inspect yearly for cracks, pin holes, or other imperfections that could cause the inflator
to become unsafe . Never cut or drill holes in the inflator.
Make sure that the hose is free of obstructions or snags . Entangled or snarled hoses can
cause loss of balance or footing and may become damaged.
Read and understand all instructions . Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
3